Sensore per porte e finestre WIFI

一,Instruction
This product is an intelligent WIFI door window sensor, designed with ultra-low power consumption technology, composed of a main module and a permanent magnet, used to detect if doors, windows and drawers have been opened or moved illegally. If the main module and the permanent magnet change in position, the main module will send alert messages to the "Smart Life" app through wifi network, to achieve the function of security alarm. It is widely used in smart home, security protection and other fields.
2,Funzione
Work independently with WIFI network
Push door open/close notification to app
Avviso di batteria scarica e{0}}funzione di monitoraggio della potenza in tempo reale
Using low-power MCU and communication module to achieve ultra-low power consumption
Applicable to doors, windows, drawers and other application scenarios that require movement detection
3, Scarica APP
Please download the app by searching "Smart Life" in the application store or by scanning the QR code below.
IOS App: Please search " Smart Life" in Apple store to download .
Note: IOS app has no QR code , have to download it in Apple store by searching" Smart Life"
Android App: Please search " Smart Life" in Google Play to download or scan the following QR code to download.
Notes:1,Mainland China users can scan the Official Website Version and download it.
2,Non-Mainland China users just scan the Google Play Version .
3,Both the Official Website Version and the Google Play Version are the same app, just only the download channels are different.

4, FUNZIONAMENTO E ABBINAMENTO
Open the rear cover and load the battery before you switch on the device Wait 5s-10s,then long press SET key for 5s-8s to start pairing (indicator blinks).
Open "Smart Life" APP,click plus on the upper right corner to add devices, select Sensors-Contact Sensor(Wi-Fi).
Connect the smartphone to WIFI(2.4G only), enter the wifi password and start pairing according to the instructions (make sure your smartphone, door sensor and router are within a range of no more than 2m between each other)
APP receives alarm notification when contact sensor is triggered.
Enable the APP PUSH feature as per your smartphone settings which might vary by smartphone brands.
5,INSTALLAZIONE E ATTENZIONE
1,Install the sensor(A) and magnet(B) separately.A should be put on the frame of door / window, while B,on the door / window.
2,LED indicator on the sensor blinks 1s when it's triggered.
3,Test the device and indicator before installation.
4, Allineare i simboli del triangolo su entrambi AB durante l'installazione.
5, la distanza tra AB non deve essere superiore a 2 cm.
6,Please replace battery when the low power alert pops up in the APP.
7,Place of installation should be far from strong magnetic fields.
8, Metodi di installazione: biadesivo- o viti.

6, SPECIFICA
| Tensione di lavoro | 3 V (batteria AAA2) |
| Corrente di lavoro | 19-59 mA |
| Corrente di attesa | Less than or equal to 35uA |
| Network | WIFI(802.11b/g/n) |
| Distanza di trasmissione Wi-Fi | 30M(open space) |
| Distanza di installazione | Less than or equal to 2CM |
| Distanza di innesco | 23CM |
| Temperatura di lavoro | -10grado 55grado |
